4 Signs of a Gas Pressure Problem

4 Signs of a Gas Pressure Problem

Natural gas or propane are both great ways to provide heat to your home and a flame to cook your food. Appliances that run on natural gas or propane need the gas to be at a specific pressure for the appliance to work properly. If the pressure is off, it can result in the appliance not working at all or other potentially dangerous issues. If you suspect that you are having a pressure issue, it is a good idea to have a gas line pressure test in Marietta to be sure that everything is working correctly. Here are a few signs that you might be having a pressure issue in your gas line.

Trouble lighting – If your gas stove is slow to light, it could mean that there is not enough pressure to push the gas through to the burner. If the ratio of gas and air is off, it will make it much more difficult to ignite.
Orange flame – If you notice that your appliance has an orange flame, that could also be a sign of a pressure issue. It could also be a sign that there is a problem with the burner tube, especially in water heaters and furnaces.
Excessive flame – If the flame seems unusually large or high, this could indicate that there is too much pressure in the line. If the pressure is not reduced sufficiently it could lead to a dangerous situation
Soot – One of the biggest signs that something is not right can be soot. This black smoky residue may begin to build up on the bottom of your pans, showing that something is not right. This will often be accompanied by an orange flame as well. This one may be harder to find in sealed appliances such as your furnace or water heater.

Gas line issues are never fun and can actually be dangerous. If you suspect that your gas lines do not have the correct pressure, it is very important that you have a gas line pressure test performed in your home in Marietta. A professional can then properly correct the situation so that your appliances get back to working at maximum efficiency. Oftentimes, the issue will be a regulator or a leak in the gas line. Regulators control the amount of pressure in your gas lines and appliances and will wear out over time. If you think you may have an issue, you need to contact a professional plumber as soon as possible to get it corrected.

Take Security to Your Own Hand and get a HIPAA Risk Assessment

 

If your organization deals with protected health information, or PHI, the Department of Health and Human Services requires you to perform risk analysis as the first step to implement the safeguards specified in the HIPAA Security Rule, and ultimately achieve HIPAA compliance.

This includes all HIPAA hosting providers.

But what is a risk analysis? And what should be really included in your report?

The Health and Human Services Standards Guide outlines the nine components of compulsory risk analysis.
By conducting a comprehensive HIPAA risk assessment, it is very difficult to do on their own. You may want to contract with HIPAA auditors to help you.

Most people do not know what to find out, or they end up passing things because they do not understand data security.

If risk analysis is important to your security, then you do not want to ignore the key elements in the analysis.

There are nine components that health organizations and health-related organizations that store or transmit protected electronic health information must be included in their documents:

1. Scope of Analysis

To identify your scope – in other words, the area of ​​your organization you need to secure – you need to understand how the patient’s data flows in your organization.

It covers all the electronic media your organization uses to create, receive, maintain or transmit portable media, desktop and ePHI networks.

There are four main parts to consider when determining your scope.

Where PHI starts or enters your neighborhood.
What happens after that in your system.
Where PHI leaves your entity.
Where potential or leakage exists.
2. Data Collection

Here is a list of places to get you started in the documentation where PHI enters your neighborhood.

Email: How many computers do you use, and who can log in to each?
Text: How many mobile devices are there, and who owns them?
EHR entry: How many staff members are included in the data?
Fax: How many fax machines do you have?
USPS: How are incoming mail handled?
New patient paper: How much paper does the patient have to fill? Do they do this at the front desk? Test room? At another place?
Communication business associates: How do business partners communicate with you?
Database: Do you accept a marketing database of potential patients to contact?
It’s not enough to know where PHI started. You also need to know where to go when you enter your neighborhood.

To fully understand what is happening with the IRC in your environment, you should record all hardware, software, devices, systems and data storage locations that touch the IRC in any way.

Then what happens when the IRC leaves your hand? It is your job to make sure it is transmitted or destroyed in the safest way possible.

Once you know all the places where PHI is placed, transmitted, and stored, you will be better able to protect those vulnerable places.

Identification and Document of Potential Vulnerability and Threats

Once you know what’s happening during the PHI’s lifecycle, it’s time to find a gap. This gap creates an environment for unsecured PHI to leak inside or outside your environment.

The best way to find all possible leaks is to create a PHI current diagram documenting all the information you find above and putting it in a graphical format.

Viewing diagrams makes it easier to understand the PHI path and to identify and document anticipated vulnerabilities and threats.

Vulnerability is a defect in components, procedures, design, implementation, or internal control. The vulnerability can be fixed.

Some examples of vulnerabilities:

The website is incorrectly encoded
No office security policy
The computer screen is in view of the public patient waiting area
Threats are the potential of a person or object to trigger a vulnerability. Most threats remain outside your control to change, but must be identified to assess the risks.

Some examples of threats:

Geological threats, such as landslides, earthquakes, and floods
Hackers download malware to a system
The actions of members of the work force or business associates
Again, even if you are above average in terms of compliance, you may have little understanding of vulnerabilities and threats. It is important to seek professional help for your HIPAA risk assessment.

Assessing Current Security Measures

Ask yourself what kind of security measures you take to protect your data.

From a technical perspective, this is the case

The Ultimate Quick Guide to the Apartment Pest Control

 

Living in an apartment has its perks. It also has its creepy-crawlies. This guide is for apartment dwellers who need to keep their spaces safe.
Your apartment is a magnet for common household pests.

Even if you keep everything meticulously clean, leave your garbage out twice a week, there’s still no guarantee that creepy crawlers will not get in.

Bugs can get into your home through cracks in concrete floors, air vents, or even through the gaps in your front door.

If the thought of insects squirming into your home crawl, then this guide is for you!

How to Control Pests in Your Apartment
1. Call the Professionals

Before you go breaking out the heavy poisons yourself or setting out traps, you might want to consider your pest problem warrants calling professional pest control services.

Using poisonous chemicals You ‘re not familiar with can result in sickness or even death. For the inexperienced bug-killer, you may even spend money on expensive extermination methods only to find that it does not kill everything and have to call Pest Control anyway.

How much of a priority is it your apartment is cleared of pests quickly and permanently? Can you risk the bugs coming back in a week to ruin your day?

If need the most effective and permanent way to kill pests in your apartment, consider calling in the professionals!

2. Keep It Clean!

The best way to control your pest problem is to prevent it from happening in the first place!

Although there is little you can do to stop an unsanitary neighbor from drawing pests into your building, if you keep your apartment clean, you can detect an infestation quickly and stop it before it gets out of control.

Pay specific attention to your kitchen and any area where moisture builds up. Pests get into your home for food and water, so when you leave dirty dishes in your sink or spills on your countertop, you’re practically inviting bugs in for a feast.

Clean regularly and the pests will have no reason to invade!

3. Spice Things Up!

Tobasco Sauce
Most bugs can not stand the taste or smell of spicy foods like Tobasco sauce.

Spraying a solution of water and Tobasco near potential entry points is a great natural way to ward off ants, cockroaches, and spiders.

But be careful! If your solution is too strong, you might be dealing with the smell of hot sauce yourself until you clean it up!

Garlic
It may not be the best option for a first date, but if you want to keep the pests away, most bugs can not stand garlic.

Leave a few cloves under the sink in your kitchen or something else.

And bonus: it’ll solve your vampire problems too!

Peppermint Oil
If it’s mice you’re trying to rid from your place, then you’re in luck in terms of a fresh-smelling apartment.

Rodents can not stand the minty smell of peppermint oil and will turn tail and run when they encounter it.

Mix about 1/4 cup of water with 40 drops of peppermint oil in a spray bottle and apply liberally beneath sinks, in kitchen cabinets, and along baseboards in your home.

Summary
If you’re dealing with a pest infestation in your apartment or you’re just trying to prevent it from happening, keep your apartment clean, use natural household remedies, and do not be afraid to call in the professionals!

Why You Need a Heat Pump Replacement in Decatur Every 15 Years

Why You Need a Heat Pump Replacement in Decatur Every 15 Years

Heat pumps gained popularity in the 1970s when the nation was in the midst of a gas crisis. These pumps were more efficient than the traditional heating and air conditioning methods of the time and remain more efficient today. They are used widely in HVAC – Heating, Ventilation and Air Conditioning – units and they work with the unit whether it’s heating or cooling. The pump itself does wear down over time, and experts recommend a heat pump replacement in Decatur every 10 to 15 years to ensure optimal energy efficiency and working capacity.
Don’t Be Fooled

 

If you envision a heat pump like a pump in your automobile’s engine, don’t be fooled. Even though it’s called a “pump,” a heat pump is a complex unit that looks a lot like an air conditioner. You might have a pump and not even know it, because your HVAC in Decatur looks just like the air conditioner at your previous residence. These weigh as much as air conditioners do as well, sometimes as much as 3 tons or more, and their efficiency is ranked by SEER, or Seasonal Energy Efficiency Ratio, measurement just as heating and air conditioning systems are ranked.

How They Work

An HVAC in Decatur that is a heat pump works like a normal air conditioner would when you cool the house. It cycles refrigerated air into your home to keep the temperature where you have set the thermostat. When the outdoor air cools in the fall and winter and you switch your heater on, the pump reverses the cycling motion to bring warm air into the home instead of cool air. How it does this is it takes the cold air from the conditioner and blows it outside and brings the warm air from the unit that would normally go outside in. This is a unique process, as the pump works the same but reverses motion to achieve the desired effects inside your home.

Lifespan per the U.S. Department of Energy

According to the U.S. Department of Energy, the lifespan of a heat pump is 10 to 15 years, but before your huff in disgust and call a contractor to rip out the unit and replace it with separate heating and air conditioning systems; they don’t last any longer than heat pumps do. You might not need a heat pump replacement in Decatur after 15 years, but you should do so anyway, because the unit will begin to fail regularly and the repairs will ad up.

As with replacing heating and air conditioning units every 10 to 15 year, replacing your HVAC in Decatur will save you money on your energy bills. Technology changes quickly in this industry, and newer units are being engineered and built all the time to increase energy efficiency. If you select an ENERGY STAR unit for your heat pump replacement in Decatur, people have reported saving up to 20 percent on their utility bills after the new system has been installed. That’s a lot. Contact a professional contractor today to come out and inspect your heat pump to see if it’s time for a new one.

How Much Isolation Isolation Do You Really Need?

 

Is your house isolated properly?

Probably not, at least according to the North American Isolation Manufacturing Association or NAIMA. The organization found that by 2015, 90 percent of isolated homes are not isolated enough.

What does this mean? As a homeowner, your home may be too hot or cold. Moreover, your energy bill may be too expensive.

As you pass by your house and reevaluate your isolation situation, you may wonder how much of the loft insulation you really need?

The answers vary. We will explain the conditions that determine the amount of attic insulation that is right for your home.

Age of home
How old is your house?

If you bought a house shortly after it was built, you may not need to add as much insulation as possible. The change is at home 10 years and over. This requires a heavier insulation layer.

If not, as mentioned, you waste precious money every month. By isolating, you can reduce the use of air conditioning and heating.

Location
In addition to the age of your home, your location is also important in determining how much insulation the attic you need.

Every state in the country (and some outside the United States) gets R.

According to International Energy Conservation Code or IECC and U.S. Department of Energy or DOE, this R value is divided into eight uninsulated loft zones:

Zone 1, which is R30 to R49 and covers the Virgin Islands, Puerto Rico, Guam, and Hawaii
Zone 2, which is R30 to R60 and covers Florida, parts of Georgia, parts of Louisiana, parts of Texas, parts of Arizona, and a small part of California
Zone 3, which is R30 to R60 and covers other parts of California, parts of Arizona, parts of New Mexico, parts of Texas, mostly Oklahoma and Arkansas, Mississippi, Alabama, South Carolina and parts of North Carolina
Zone 4, which is R38 to R60 and includes parts of Washington, parts of Oregon, parts of New Mexico, parts of Missouri, parts of Illinois, parts of Indiana, Kentucky, Virginia, Delaware, Maryland, New Jersey and Connecticut.
Zones 5 through 8, the R49 to R60 and cover all other states
Country of Isolation Your Attic is current
Walk through your attic and look for the following type of isolation. Each has an R value that determines the quality of the loft insulation.

Batts, made of fiberglass, have an R-3.2 x depth value
Granules, which may be made of pearlite or vermiculite, have an R value of 2.7 x depth
Gray gray or cellulose has a R value of 3.7 x depth
The stone wool fiber, which is black or gray, has an R value of 2.8 x depth
Loose fibers, which may be pink or slightly yellow, have a value of R 2.5 x depth
Now that you know more about the insulation requirements of the attic, it’s time to make a decision. Does your attic need to be re-insulated?

When choosing an isolation company, look for who has a long record of services in your area. It is also best if they provide different types of insulation, such as spraying spray insulation or spray foam insulation.

Do not let your attic spend more money. Get a grip on your isolation today!

Home Relocation: The Pros and Cons of DIY Moves

Home Relocation: The Pros and Cons of DIY Moves

There are many tasks that people have to accomplish in their lives. Some of these tasks are quite simple and do not require serious preparation, while others are very responsible and crucial. Moving includes the second kind of task, because this is the decision, which can change your life forever. If you have ever planned a home relocation, then it should not, perhaps, be explained how complicated and frightening the preparation process is. If you have not faced any difficulties in the move, but will soon move to a new location, you’ll be happy to know as much as you can about this transfer process. In this article, we will discuss the advantages and disadvantages of the DIY movement. This is because many people can not decide whether it is better to cope with their own relocation or hire a professional driver to help them.
Pros and Cons of DIY Moves

Home Relocation: The Pros and Cons of DIY Moves

Before making a decision, it makes sense to analyze the pros and cons of the DIY movement first. If you feel that this option has more losses, you will be able to find a professional moving company like www.usmajormoving.com before it’s too late. Some of the most obvious advantages of this choice include:

Cost

It goes without saying that DIY movements are cheaper than hiring professional drivers. You do not have to pay for moving company services. You just need to buy packaging materials, arrange transportation and other related things.

Schedule

No need to worry about packing and preparing to move, because you’re planning the whole process. You do not have to rely on the mover and in haste, trying to set things right on time.

Control

When you plan and organize your own steps, you have control over each step. By packing up the items and making all your own decisions, you’ll be able to know where they are and what tasks still need to be done. This is very important for the responsible person, who is accustomed to controlling everything that happens in their life.

Security Home Relocation: The Pros and Cons of DIY Moves

As far as there are many mobile companies offering their services online and offline, it is not easy to say which of them is truly trustworthy. You do not have to worry about the security aspect, as you move on your own. Correspondingly, your money and possessions are also not at risk.

Speaking of the disadvantages of the DIY movement, they also exist. The most extensive of them include the following:

Stress and Complexity

One of the reasons for hiring professional drivers is the too much hassle associated with the transfer process. There are so many tasks to be completed on time that it is difficult for an inexperienced person to control everything. As a result, people feel stressed and confused, because they do not know what to do.

Physical strength

Moving implies lifting, carrying and transporting heavy objects. Obviously, people who are unfamiliar with this and have no friends or relatives, who can help them, may find this task too complicated. Lack of physical strength can result in injury and trauma.

Lack of experience

If you are not involved in the mobile industry, you run the risk of unpredictable situations. The professional movers are aware of this problem and try their best efforts to avoid it. They also know how to pack things properly to prevent their loss and damage and they can provide you with valuable information and recommendations on how to make you trouble free and comfortable.

Error

People, who do not know all the difficulties and problems in the relocation process, are at risk of making a lot of mistakes. They can easily ignore the things that are known by the professional movers. This can ultimately lead to unpredictable costs and situations that may negatively impact the relocation process.

Now that you are aware of all the pros and cons of the DIY movement, it’s up to you to analyze the info you get and draw conclusions. To adopt the right decision, think about the options, which will be more convenient, save time and comfort. This is very important, in terms of planning and organizing a step.

Can CBD Fibromyalgia Oil Help Find Relief?

 

Those with Fibromyalgia develop symptoms that can be difficult to treat. Enter the CBD oil – many find success. We share why here.
“But you look very good.” “It can not be that bad.”

This is the expression of people suffering from chronic illness who often hear it.

Fibromyalgia is a very frustrating condition to stay with because there is no change that occurs in a person’s appearance to show that they are sick.

Instead, fibrous sufferers must work through the pain and do what they can to control it.

Unfortunately, the medical field does not respond much to the cause of fibromyalgia and how to help it. There are only a few drugs out there at the moment and they are not known for working well.

It is time for care to pursue the severity of this condition, and that is why everyone with fibromyalgia should look into what CBD can do for them.

What is fibromyalgia?
Because fibromyalgia is an “invisible disease,” (meaning you can not say that someone is suffering from it) it is important to know what it really is.

Fibromyalgia is a chronic disorder that causes pain and tenderness to occur at various points of the body, or sometimes throughout the body. It is unpredictable and shifts in location and intensity of pain.

Some people tend to experience the level of pain they come and go from day to day but others live in constant discomfort.

Fibromyalgia can also cause people to lose sleep and become tired, have gastrointestinal problems, and get depressed.

It’s also surprising to know that 80-90% of people with fibromyalgia are women!

Why CBD oil should be on your radar
If you experience pain associated with fibromyalgia, you should keep the CBD oil on your radar.

This remarkable natural product is proven to really help fibromyalgia sufferers while avoiding the usual side effects of pharmaceutical drugs.

What is CBD oil?

CBD oil is a natural oil extracted from hemp plant (marijuana). Now, we’ve all heard a lot about the “high” effect of marijuana but do not worry – CBD does not cause high.

This is associated with helping children with epilepsy and citing many of the CBD oils as their way of managing fibromyalgia very effectively.

How can help sufferers fibromyalgia?
With so many states currently validating marijuana and its various forms, it is true that there is not much scientific evidence to suggest that CBD oil helps the occurrence of fibromyalgia.

Then again, fibromyalgia is a disease that is not actually understood by the medical!

The truth is that many people say that consuming CBD oil has helped live more comfortably.

CBD oil helps ease the pain felt by fibro patients by increasing the level of “endocannabinoids” in our bodies. It turns out that endocannabinoids are our body’s natural way to relieve pain and reduce inflammation, and CBD oil only increases these benefits!

If you are sick for trying prescription drugs and do not feel relieved, keep an open mind to try the CBD oil. It can help you manage the debilitating symptoms of fibromyalgia and restore you to a normal life!

When it is time to test CBD oil for yourself, be sure to monitor your symptoms to find out how often you should use them for the best effect.

7 Promising Business Is Suitable To Do Together

7 Promising Business Is Suitable To Do Together

Building a business with your partner, why not? Currently many couples are starting to plunge to build a business together. Many benefits you can get if the business together. You will have more time together. In addition you can foster cooperation but still professional. Interesting right?

For those of you who have a plan to build a business with a partner, but have not decided what type of business is suitable to be coached together, consider some profitable business ideas worth trying with your partner:

7 Promising Business Is Suitable To Do Together

1. Business of animal care services

Many of those who like to raise animals. There is even a sleep to be accompanied by his pet. But as a worker, there may be out-of-town assignments that are not possible to carry so they definitely need pet care. In big cities animal care services are much sought especially during long holiday moments. This business will be crowded customers. This business can be done with a partner with a lot of capital. Simply provide a cage with a clean environment and a variety of facilities for animals that , you can run this business.

2. Culinary business

Who does not like culinary? everyone would love culinary. If you and your partner love the culinary field there is no harm in you starting to open a culinary business. The benefits gained from this venture are promising. You just choose a strategic location and a unique menu to start this business.

3. Business art

 

It has a soul and a life. But art can also be an effort. Examples such as making handicrafts bags, brooches or paintings in wood, frames or other. You just dig up the information what artwork is in great demand and execution with your partner. Make artwork unique and different from others and sell in various media offline and online.

4. Business event organizer

7 Promising Business Is Suitable To Do Together

Business Event Organizer (EO) is a lucrative business. How not business services are much needed. Nowadays many events are done smoothly thanks to the services of an EO. You simply find a cheap store that sells the equipment needed in an event. Learn to manage customer budget but with satisfactory results.

5. Cafe

If you do intend to open a business, but are constrained by a small capital, you need not hesitate or give up, you can set up a simple cafe as a beginner, later if it has developed you can create a larger branch. This business can be done together with your partner so you can exchange thoughts such as talking about cafe menu, location and more.

 

6. Build a freelance business

Lots of freelance business that you can develop with your partner. Among them such as business writing services, website developers, design services and more.

Teaching Your Kids about Fire Safety

Teaching Your Kids about Fire Safety

For a child, fire can seem like a fascinating toy. It’s fun to see how paper, plastic, metal, and food all react when jabbed into a flame. No matter how amusing it might seem, playing with fire is dangerous. It can be difficult to explain fire safety to a child though. To help you ensure that your little ones are safe around flames, it’s necessary to teach them the basics. From understanding fire sprinklers in Berkeley Heights to teaching them how to stop, drop, and roll, here are 10 things that every child should know about fires.

Matches aren’t toys. There is nothing cooler to a kid than striking a match and watching it burn. Teach your kids that matches should never be played with. These lighting devices burn quickly and can easily start other things on fire. Avoiding lighters, matches, and candles is an absolute must.
Familiarize them with fire preventing devices. Your children should understand the purpose of fire detectors, fire sprinklers, and fire extinguishers. On a regular basis, show them how these things work and how they are used when a fire occurs. Teaching Your Kids about Fire Safety
Don’t hide, go outside. In the event of a fire in your home, does your child know what to do? Teach your children the importance of getting out of a burning building as quickly and safely as possible. They shouldn’t hide or wait for firefighters to reach their location. Instead, get outside and meet parents or caregivers at a designated spot.
Create an escape plan. While you do need to teach your children not to hide in the event of a fire, they need to know how to escape. Create a plan with a few different escape routes out of each room in your home. This gives them a few different options should smoke block one of their paths. Pick a meeting location outside of your home where everyone should gather after getting out of the house following a fire.
Stop, drop, and roll. If your child is involved in an incident which catches them on fire, they need to know how to put it out. Teach them to stop moving, drop to the ground, and roll around as quickly as possible to put the fire out. Practice this a few times as well so that it sticks with them.
Fall and crawl. Teach your children about the importance of avoiding smoke in the event of a fire. If they wake up to a smoky house, they need to fall to the floor and crawl through the escape route that you’ve talked about. This prevents smoke inhalation and keeps their lungs healthy.
Don’t take anything with you. When a fire occurs, your child will most likely want to pack a bag and take all of their favorite toys with them. Teach them th Teaching Your Kids about Fire Safety e importance of getting out quickly and leaving the rest behind. Things can be replaced. Lives can’t.
9-1-1. In the event of a fire, your children should know exactly who to call. Teach them how to unlock a cell phone or pick up the home phone and dial 9-1-1. Have them practice telling the dispatcher their address and explaining that there was a fire.

Once you have taught these points to your kids, keep practicing and reviewing them. The more informed your children are, the better. Fire safety is some of the most important information they can retain in their minds. Then, if the fire alarm ever sounds or if the fire sprinklers in Berkeley Heights ever start spraying, your family will know exactly what to do. After all, this type of knowledge can save lives.

3 Unique DIY’s That Use Leftover Steel Tubes

 

We seriously doubt that many people have leftover steel tubes lying around their homes. After all, people are usually (hopefully) careful to order a reasonable number of materials for big projects.

And, let’s get real, even if they do happen to have a few extra ones lying around, their first instinct is not to get crafty with them.

Even so, they can not just throw them in the trash; that would be a complete waste of cash.

So what should people do with their extra steel tubes?

We’ve got 3 creative DIY projects that will help you make the most out of them.

DIY Clothes Rack
If you ever find yourself in need of closet space, you can always use your spare steel tubes in order to try your hand at building a clothes rack.

As far as clothes racks go, the one we’ve recommended is pretty easy to build; as a matter of fact, there are only 16 simple steps (and pictures to accompany them) to building it, though, to be fair, some steps require that you carry out multiple tasks.

And, yes, we know: By recommending this project, we are allowing you to feed your clothing addiction, but, much to our thinking, clothing addictions are not necessarily bad things to have.

So get building.

DIY Bookshelf
Our avid readers will appreciate this one, and it even comes with an instructional video.

Unfortunately, however, you’ll need a bit more than your old steel pipes in order to get this job done.

While there are certainly many variations of this project, the one we’ve referenced requires that you have a “butcher block,” “table saw,” and “hand plane.”

We realize that this project can be a good thing for you. .

And you’ll get to tell everyone that you built it yourself.

(With the help of a video tutorial.) But hey, it still counts.)

DIY Television Stand
Okay. You probably already have a television stand or two in your home.

We’re willing to bet, however, that at least one of them has begun to bore you. Or falling apart at the every least.

That said, why not try turning those old pipes into a new entertainment stand?

Luckily for you, this project, unlike our last suggestion, is simple (and cheap) to put together.

While you will have to spend a little bit of money and time on it, you should have no problems constructing it.

Even if you’re a novice, we guarantee you’ll be able to bring this television stand to life.

Conclusion
As we said before, we understand that some people just have the tubes lying around, and even the people who happen to have them probably have a few of them on hand.

If you fall into the second category and find that you do not have enough steel tubes to follow these projects, please feel free to check out our stainless steel supplies here at Metal Supplies LTD.

After all, we know that there is nothing more frustrating than not being able to finish what you started. So get out there and try (and finish) these awesome DIY projects!